Staplers & Staples

Staplers & Staples

Industrial Staplers and Staples

Carton closers, heavy-duty tackers and matching fasteners for packing benches and workshops

Tape isn't always enough. Heavy cartons, rough handling and cold, damp stores can all make tape lift, and that's where a carton stapler earns its keep. For fixing fabric, sheeting and labels to timber, a staple gun is the tool for the job. We supply both, with the right fasteners to suit, from our Villawood warehouse.

Not sure which tool you need? See how to choose below, read our full guide, or go straight to a quote.

Two tools, two very different jobs

The quickest way to pick the right tool is to ask one question: is there something solid behind what you're fastening? If you're closing the flaps of a box, you need a carton closer. If you're fixing into timber, you need a tacker.

Carton closers
These push the legs through both flaps and fold them over on the inside, so the box stays shut. Our hand-operated BH-35 is ordered in on request and takes 292 series fasteners.
Heavy-duty tackers
The Arrow T50 fires straight into timber. It's the go-to for upholstery, crate linings, shade cloth, insulation, plastic sheeting and signs.
Cordless carton closers
For busy lines, battery-powered top closers seal cartons fast with no air hose or compressor. See the range in our staple guns and carton closers guide.
Plier tools
Light, all-metal plier tools are handy for closing bags and light cartons, tagging and farm work. Ask us about sourcing one for your team.

Setting Up a Packing Bench or Buying in Bulk?

Tell us what you're closing or fixing and roughly how many a week. Our Villawood trade desk will match you with the right tool and send straight pricing on boxed fasteners.

Power Packaging Pty Ltd | Dispatching daily from our Sydney warehouse

How to choose the right fasteners

Fasteners only fit the tool they're made for. Match the series to your tool first, then pick a leg length to suit what you're fastening.

For cartons: 292 series, 16mm or 19mm

A wide crown spreads the load across the flap so it won't tear through. As a rule of thumb, 16mm legs suit most single wall boxes, and 19mm gives extra grip on thicker or double wall board.

For timber: T50 series, 8mm, 10mm or 12mm

Start with 10mm for most jobs. Drop to 8mm for thin fabric and paper, and step up to 12mm when you're fixing through something thicker, like doubled-over canvas or heavy sheeting.

Too short or too long?

If the legs are too short they pull out. If they're too long they can bend over or poke through into the product. When in doubt, test a few on a spare piece of the same material.

What we stock

Product Fits Pack Good for
Arrow T50 tacker T50 series Each Timber, upholstery, sheeting
T50 8mm Arrow T50 5,000 Thin fabric and paper
T50 10mm Arrow T50 5,000 Everyday fixing
T50 12mm Arrow T50 1,250 Thicker material
BH-35 carton closer 292 series Each, on request Closing heavier cartons
292 series 16mm BH-35 2,000 Single wall cartons
292 series 19mm BH-35 2,000 Thicker and double wall cartons

Should you staple or tape your cartons?

For most boxes, packaging tape is quicker and gives a cleaner seal. Carton closers come into their own on heavy or oversized boxes, reused cartons, and anything stored in cool, damp or dusty conditions where tape can lose its grip. They also make tampering more obvious. Plenty of warehouses use both, and at higher volumes a carton sealer is usually the fastest option.

Tips for a clean, strong result

Hold the tool square and press it firmly flat against the surface before firing. Check the first few on each job to make sure the legs are fully folded or fully driven. Keep a spare box of fasteners at every bench so nobody runs dry mid-order, and clear jams with the tool unloaded. Wear safety glasses when using a tacker, and never point it at anyone. Pair your tools with the right cardboard boxes for the load.

Frequently Asked Questions

Can I use a staple gun to close cardboard boxes?

Not really. A tacker fires straight into whatever is underneath, so the legs don't fold over and the fastener pulls out. A carton closer folds the legs over on the inside of the flap, which is what keeps a box shut.

Do other brands fit the Arrow T50?

Yes, as long as they're sold as T50 type. T50 is a standard size, so any genuine T50 fastener will fit. Other series won't, even if the length looks right.

What leg length should I use for cartons?

As a rule of thumb, 16mm suits most single wall boxes and 19mm is better for thicker or double wall board. Test a few on your own cartons to be sure.

Is stapling stronger than taping a box?

On heavy, oversized or reused cartons, and in cold or damp storage, a carton closer usually holds better because it doesn't rely on adhesive. For everyday cartons, tape is quicker and gives a neater finish.

Do you offer bulk pricing on fasteners?

Yes. Better rates are available on larger and regular orders. Tell us which series and lengths you use and roughly how many boxes a month, and we'll put a price together.

Enquire About Staplers and Fasteners

Looking for bulk pricing, a tool for a new packing bench, or help matching fasteners to your tool?

* Indicates a required field