Steel Strapping Tools

Steel Strapping Tools

Steel Strapping Tools: Tensioners, Sealers and Combination Tools

Manual and battery tools to tension, seal and cut steel strap

Steel strap only holds a load if it's pulled tight and sealed properly. Our steel strapping tools do exactly that: a tensioner pulls the strap tight, a sealer crimps the seal to lock it, and a cutter finishes the job safely.

We supply everything from simple hand tools for the odd pallet to sealless and battery tools for busy strapping lines, including Signode MIP tools and Siat battery tools. Tell us your strap width and grade, and we'll match the right tools.

Not sure which tools you need?

How Steel Strapping Works

1. Tension

Wrap the strap around the load, overlap the ends and use a tensioner to pull it tight.

2. Seal

Slide a steel seal over the overlap and crimp it with a sealer, so the strap can't slip.

3. Cut

Cut off the spare strap with safety strap cutters, holding the end so it can't spring back.

Or Do It All in One

A combination or sealless tool tensions and seals in one step, which saves time on busy lines.

Our Steel Strapping Tools

Tool Type Suits Best for
S290 Tensioner Tensioner 12 to 19mm standard strap Lighter, occasional use
MIP1300 Tensioner Tensioner 12 to 19mm standard strap Everyday heavy-duty use
MIP1400 Tensioner Tensioner Super Steel strap High-strength strap
C310 Sealer 15mm and 19mm Sealer (crimper) 15mm or 19mm strap Lighter, occasional use
MIP1100 Sealer Sealer (crimper) 19mm standard strap Everyday heavy-duty use
ST-IMA Sealless Tool Combination Steel strap, no seals needed Busy lines, fewer consumables
Siat Electra STT and STDC Battery tensioner and crimper Steel strap High volume, less effort
Safety Strap Cutters Cutter Steel strap Cutting strap safely

Choosing the Right Tools

How often do you strap? For a few loads a week, the S290 tensioner and C310 sealer are a simple, low-cost pair. For daily use, the Signode MIP tools are built to last.

What strap do you use? Tools are made for a set width and grade. Standard steel strap suits the S290 and MIP1300. Super Steel strap needs the MIP1400.

Do you want to skip the seals? The ST-IMA sealless tool joins the strap without seals, so there's one less thing to buy and stock.

Busy line or heavy strap? Siat battery tools take the effort out of every strap, which your team will notice by the end of a shift.

Complete Your Steel Strapping Kit

Steel strap. Standard, Super Steel and Magnus grades in ribbon and rope wound coils. See our steel strap range.

Seals. Steel strap seals to suit your strap width and sealer.

Dispenser. A strapping dispenser keeps heavy coils safe and stops the strap springing loose.

Edge protection. Corner protectors stop the strap cutting into cartons and spread the pressure.

Setting up a steel strapping station?

Tell us what you're strapping and how often, and we'll quote the tools, strap and seals together.

Strapping With Plastic or PET Instead?

See our plastic strapping tools and the full Siat strapping tools range, including battery, pneumatic and manual tools. For high volumes, our strapping machines do the job automatically.

Common Questions

What tools do I need to strap with steel?

You need a tensioner to pull the strap tight and a sealer (crimper) to lock the seal, or a combination tool that does both. Add steel strap seals to suit your strap width and a pair of safety strap cutters.

What's the difference between a tensioner and a sealer?

The tensioner grips the strap and pulls it tight around the load. The sealer then crimps a steel seal over the overlapping strap so it holds. They're used one after the other.

What is a sealless strapping tool?

A sealless tool tensions the strap and then cuts interlocking notches into both layers, so the strap locks itself without a separate seal. It saves buying seals and speeds up strapping on busy lines.

Which tool suits Super Steel or Magnus strap?

Higher strength strap needs a tensioner built for it. The MIP1400 tensioner suits Super Steel strap. Tell us your strap grade and width and we'll confirm the right tools.

Do you have battery strapping tools for steel?

Yes. The Siat Electra battery tensioner and battery crimper take the effort out of strapping, which helps on busy lines and with heavy strap.

Can you help me choose between tools?

Yes. Tell us what you strap, how often and the strap you use, and we'll recommend a setup. We're the exclusive Australian distributor of Siat and Columbia strapping tools, so we know them well.

Enquire About Steel Strapping Tools

Tell us your strap width, grade and what you're strapping, and we'll recommend the right tools with pricing.